Previous Topic  Next Topic

Applying Web Controls in Page Report

Web controls are report components that Logi Report designed to work like controls on web pages. This topic describes how you can apply these four types of web controls: parameter control, parameter form control, filter control, and navigation control, in Page Report Studio.

For page reports that you created in Logi Report Designer, you can add web controls to them only when the corresponding catalog contains business views.

You need a Logi Report Live license for Server to use this feature. If you do not have the license, contact your Logi Analytics account manager to obtain it.

This topic contains the following sections:

• Using Parameter Control to Specify a Parameter to a Report
• Using Parameter Form Control to Run Reports
• Using Filter Control to Filter Report Data
• Using Navigation Control to Undo/Redo Value Selection in Filter Controls

Using Parameter Control to Specify a Parameter to a Report

A parameter control is a web control that is bound with a parameter used by the current report. By specifying values to the parameter in a parameter control, you can pass the parameter values to Page Report Studio and run the report with the specified values.

Cascading parameters cannot be used in parameter controls. If you want to do this, use parameter form controls instead.

To insert a parameter control and use it to specify a parameter to a report:

1. Do either of the following:
   • Select Menu > Insert > Parameter Control, then select the destination where you want to add the parameter control.
   • Drag Parameter Control from the Toolbox panel to the destination in the report.

   Server displays the Insert Parameter Control dialog box.

   

2. Select the parameter you would like to add to the parameter control, then select OK.
3. A parameter control will be added into the report. Specify the value for the parameter. You may specify the value in one of these ways.
4. Once the value in the parameter control changes, the report will re-run with the new parameter value.

If the specified parameter is no longer used in the report, the parameter control becomes invalid.

Back to top

Using Parameter Form Control to Run Reports

A parameter form control is a web control that is bound with the parameters used by the current report or other reports. By specifying values to the parameters in a parameter form control, you can make the reports run with the specified parameter values.

To insert a parameter form control and use it to run report:

1. Do either of the following:
   • Select Menu > Insert > Parameter Form Control, then select the destination where you want to add the parameter form control.
   • Drag Parameter Form Control from the Toolbox panel to the destination in the report.

   Server displays the Insert Parameter Form Control dialog box.

   

2. Specify the target reports to run using the parameter form control.
   • To run the current report, select Current Report, then specify the parameters used to run the report from the Select Parameters box.
   • To run other reports, select Others, then select the reports you want to run. If all the selected reports contain no parameters, you cannot finish the dialog box.
3. Specify whether to include the Submit button in the parameter form control. If Submit is included, it is used to submit the parameter values you specified in the parameter form control. If Submit is not included, once you change the values of a parameter in the parameter form control, the new values will be applied automatically.
4. Select OK in the dialog box to save the changes.

   The parameter form control is now inserted in the report. It lists the selected parameters for the current report or lists all parameters used by the specified reports.

5. In the parameter form control, specify values of the listed parameters. You may specify the values in these ways.
6. Select the Submit button to run the current report or the specified reports if the button is available. If there is no Submit button, the change of values in the parameter form control will trigger report re-running.

If you save or publish a report containing a parameter form control to another directory, Server does not save or publish the reports that you bind the parameter form control with, along with the report.

Back to top

Using Filter Control to Filter Report Data

A filter control is used to filter one or more data components in a report, which refer to tables, banded objects, charts, and crosstabs. For how a filter control works, see Filtering Scenarios.

The filters created via filter controls are also referred to as on-screen filters.

To insert a filter control and use it to filter report data:

1. Do either of the following:
   • Drag Filter Control from the Toolbox panel to the destination in the report.
   • Select Menu > Insert > Filter Control, then select the destination where you want to add the filter control.

   Server displays the Insert Filter Control dialog box.

   

2. The Select Fields drop-down list lists all the group and detail objects in the business views used by the current report. Select the objects of the same data type based on which to create the filter control, and then select outside of the drop-down list to close it. The name of the first selected object will be displayed as the name of the filter control.

   

3. All values of the selected objects are used in the filter control by default. If you want to customize the value list, select Customize Initial Values and then select Fetch Data to select the desired values in the Fetch Data dialog box. You can also type the values manually in the text box.

   Type a value in one row, and then press Enter to start a new row. General text editing operations such as Copy, Paste, Cut, Backspace, and Delete are supported. You need to make sure of the accuracy of the formats and values.

   

4. By default, all filter controls that are applied to the same data components are linked. Selecting a value in one filter control, for example, USA, will result in that all the other linked filter controls respond to gray the values that do not belong to USA or that do not contain USA or that are not related to USA like London. If you do not want the filter control to be affected by other on-screen filters, unselect Link to Other Filters.
5. From the Apply To drop-down list, specify which data components in the report the filter will be applied to.

   By default, Page Report Studio applies the filter to all the data components created using the business views in which the selected objects are obtained. If you do not select the data components which are based on the same business view as any selected objects, these objects will not be used in the filter and thus their values will not be listed in the filter control.

6. Select OK to insert the filter control. If the objects bound to the filter control have the same values, the values are distinctive in the filter control.
7. Select the values with which you want to filter the report data. A filter condition based on the selected values is then applied to the specified data components in the report.

   You can make use of the Ctrl or Shift key to select multiple values. If the values themselves have inter-relationship, after you make the selection, Page Report Studio will deal with the rest values to put the related ones on the top and gray the ones that have no relationship with the selected values. The grayed values are still selectable.

After inserting filter controls in the report, you can also insert a navigation control for undoing/redoing the value selection in the filter controls.

If you deleted all the data components in a report that use a business view, Server removes the objects in the business view that have been bound to the filter controls in the report from the filter controls too.

Managing a Filter Control

When you right-click on the title bar of a filter control, these options are available for managing the filter control.

• Properties
  Opens the Filter Control Properties dialog box for modifying the properties of the filter control. The dialog box provides an entry to editing the filter control. To do this, in the General tab, select the ellipsis button beside the Filter On text box. Then in the Edit Filter Control dialog box, change the settings of the filter control.
• Search
  Displays the search bar which enables you to search values in the filter control. You can also select the button on the title bar of the filter control to launch the search bar.

  See the following properties in the search bar:

  

  • Text box
    Type the text you want to search in the text box. Server lists the values that contain the matched text.
  • Close button
    Select to close the search bar.
  • More Options button
    Select the button and Server displays more search options.
    • Highlight All
      Select if you want to highlight all matched text.
    • Match Case
      Select if you want to search for text that meets the case of the typed text.
    • Match Whole Word
      Select if you want to search for text that looks the same as the typed text.
  • Previous button
    Select to go to the previous matched text when you have selected Highlight All.
  • Next button
    Select to go to the next matched text when you have selected Highlight All.

• Clear
  Cancels the selection of values in the filter control. You can also use the button on the title bar to cancel the selection. This operation can be undone/redone.
• Sort
  Sorts the values in the filter control in the ascending or descending order.
• Delete
  Removes the filter control from the report and the filter you created with the filter control will be removed from the report too. You can also use the close button on the title bar to remove the filter control.
• Hide
  Hides the filter control.

Saving and Using Default Values in Filter Controls

When the Use Default On-screen Filter Values feature is enabled for page reports, each end user can save the values specified to the filter controls in a page report as the default values for the report and for themselves. Next time when the user runs the report, the saved values will be applied to the filter controls by default. The default values in filter controls work on a user-report basis.

• To save values specified to the filter controls in a report as the default values, select Menu > Report > On-screen Filter Values and then select Save as Default.
• To clear the default values that have been saved to the filter controls in a report, select Menu > Report > On-screen Filter Values and then select Clear Default.
• To replace the values specified in the filter controls in a report with the saved default values, select Menu > Report > On-screen Filter Values and then select Restore to Default.

Link Relationship Between Filter Controls

By default, all the filter controls applied to the same data components in a report are interlinked. The link relationship is reflected on the filter values dynamically: selecting a value in one on-screen filter will result in that values which do not belong to the selected value, contain the selected value or relate to the selected value are grayed in all the other linked filter controls for distinguishing. For example, there is a filter control based on the field Country and another on City and they both are applied to the same table. When you select USA in the Country filter control, the values in the City filter control will change as follows if the control has scrollbar: the cities belong to USA are displayed in the upper area of the filter control, and the other cities are put in the lower area and grayed out. If the City filter control has no scrollbar, all the values remain their positions and the values not belonging to USA are grayed out. In both cases all the values are still selectable.

When using a filter control, you can determine whether to make the filter control apply the link relationship via the Link to Other Filters option.

See an example showing the logic of other linked filters:

When

• Filter1 is applied to DC1, DC2, and DC3.
• Filter2 is applied to DC1.
• Filter3 is applied To DC2.
• Filter4 is applied to DC2 and DC3.

The result:

• For Filter1, other linked filters are Filter2, Filter3, and Filter4.
• For Filter2, other linked filter is Filter1.
• For Filter3, other linked filters are Filter1 and Filter4.
• For Filter4, other linked filters are Filter1 and Filter3

Back to top

Using Navigation Control to Undo/Redo Value Selection in Filter Controls

A navigation control can be considered as an accessorial control for filter controls and is used to deal with the value selection operations in all the filter controls in the same report.

To insert a navigation control into a report, do either of the following:

• Select Menu > Insert > Navigation Control, then select the destination where you want to add the navigation control.
• Drag Navigation Control from the Toolbox panel to the destination in the report.

A navigation control is a combination of three buttons:

• Back
  Goes back to the previous value selection status and refreshes the report data accordingly.
• Clear
  Removes all the value selection histories and all the filter conditions based on the selections, and refreshes the report data accordingly.
• Forward
  Goes forward to the next value selection status and refreshes the report data accordingly.

Back to top

Previous Topic  Next Topic