BackPrevious Topic  Next TopicNext

Format Donut Dialog Box

You can use the Format Donut dialog box to format the donuts of a donut chart. This topic describes the options in the dialog box.

Designer displays the Format Donut dialog box when you right-click a donut in a donut chart and select Format Donut from the shortcut menu, or double-click any section in a donut of a donut chart.

The dialog box contains the following tabs (Designer displays the Behaviors tab only when the chart is in a library component):

You see these buttons in the tabs:

OK

Select to apply your settings and close the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Apply

Select to apply all changes and leave the dialog box open.

Help

Select to view information about the dialog box.

General Tab

Use this tab to specify the general properties of the donuts.

Format Donut - General

Option

You can specifies the options of the donuts in this box.

  • Gap Amount
    Specify the gap between two donuts.
  • Explode Amount
    Specify the gap between every section and the central point of a donut.
  • Donut Hole
    Specifythe radius percentage of the donut hole to the total donut circle.
  • Show Donut Name
    Select to show the names of the donuts.

KPI Value

Designer enables the options in this box if you do not set the chart property Swap Groups to "true".

  • Show KPI Value
    Select to show the KPI value for each donut.
  • KPI Value
    Specify the KPI value to display on each donut. Type the value in the text box or select Formula button and select a formula or summary from the drop-down list to use its value as the KPI value.
    • Auto
      Select to use the total value of each donut as the KPI value.
  • Position
    Select the position of the KPI value relative to the donuts: top, bottom, center, or customized. If you select "customized", you can specify the position by dragging any KPI value in the donut chart in the design area.

Back to top

Fill Tab

Use this tab to specify the color pattern to fill the donut sections.

Format Donut - Fill

Use Single Color

Select to apply single color pattern to the donut sections.

  • Self Settings
    Select to apply the color pattern to the donuts themselves only. If you do not select the option, Designer synchronizes the color settings you define here to the Pattern List property on the chart object in the Report Inspector, which the data markers of other subtypes can also apply if the chart is a combo chart.
  • Color
    Specify the color for the selected donut section if the chart has no series field, or the color of the donut sections in the current data series if the chart has series field. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
  • Transparency
    Specify the transparency of the color.
  • Color List
    Select to open the Color List dialog box to modify the color pattern for donut sections in the same data series respectively.

Use Single Color with Condition

Select to apply different color patterns to the donut sections based on different conditions. You can select Advanced or Normal to switch between the two editing modes to edit the conditions.

  • Normal
    • Select Field
      This drop-down list contains all the available fields to which you can apply the conditional fill. Select the field on which you want to define the conditions.
    • Add button Add button
      Select to add a new condition.
    • Trash Can button Remove button
      Select to delete the specified user-defined condition.
    • Value
      Designer displays the column when you select the category or series field of the chart, or a field the values of which are not numbers from the Select Field drop-down list. It shows the values that you specify for each condition.
    • Start Value
      Designer displays the column when you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. It shows the start values that you specify for each condition.
    • End Value
      Designer displays the column when you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. It shows the end values that you specify for each condition.
    • Color
      This column shows the colors that you specify to apply to the values which meet the conditions. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
    • Transparency
      This column shows the transparency of the colors that you specify for the conditions.
    • Label
      Select to modify the expression of the specified condition, which Designer displays as its legend entry label.
    • Value
      Designer displays the option after you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. Select it if you want to display data in the condition expression as value.
    • Percent
      Designer displays the option after you select a value field of the chart, or a field containing numeric values from the Select Field drop-down list. Select it if you want to display data in the condition expression in percent.
  • Advanced
    • Edit button Edit button
      Select to open the Edit Conditions dialog box to edit the condition and its color pattern.
    • Condition
      This column shows the default condition "Other" and the expression of the condition that you define in the Edit Condition dialog box.
    • Color
      This column shows the color that you specify to apply to the values which meet the condition you define in the Edit Condition dialog box. For the default "Other" condition, you can edit its color by selecting the color indicator and selecting a color from the color palette or inputting the hexadecimal value (for example, 0xff0000) of a color in the text box.
    • Transparency
      This column shows the transparency of the color that you specify for the condition in the Edit Condition dialog box. For the default "Other" condition, you can select in the cell to specify the transparency.
    • Label
      Select to modify the expression of the specified condition, which Designer displays as its legend entry label.
    • Value

      This option indicates that Designer displays data in the condition expression as value. You cannot change it.
    • Percent
      Designer does not support the option when you edit conditions in the advanced mode.

Use Multiple Colors with Condition

Designer does not support this fill type on donut charts.

Sample

This box displays a preview sample based on your selections.

Back to top

Border Tab

Use this tab to specify the properties for the border of the donut sections.

Format Donut - Border

Show Border

Select to show the border of the donut sections. Designer enables the other border properties in this tab after you select the option.

Color

Specify the color of the border. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.

Transparency

Specify the transparency for the color of the border.

Line Style

Select the line style of the border.

Thickness

Specify the width of the border, in pixels.

End Caps

Select the ending style of the border line.

  • butt
    Select to end unclosed sub paths and dash segments with no added decoration.
  • round
    Select to end unclosed sub paths and dash segments with a round decoration that has a radius equal to half of the width of the pen.
  • square
    Select to end unclosed sub paths and dash segments with a square projection that extends beyond the end of the segment to a distance equal to half of the line width.

Line Joint

Select the joint style of the border line.

  • miter
    Select to join path segments by extending their outside edges until they meet.
  • round
    Select to join path segments by rounding off the corner at a radius of half the line width.
  • bevel
    Select to join path segments by connecting the outer corners of their wide outlines with a straight segment.

Sample

This box displays a preview sample based on your selections.

Path

You can specify the fill pattern of the border in this box.

  • Outline Path
    Select to use outline path for the border.
  • Fill Path
    Select to use whole path for the border.

Dash

You can specify the dash size of the border in this box if you select a dash line style for the border.

  • Auto Adjust Dash
    Select to adjust the dash size automatically.
  • Fixed Dash Size
    Select to use fixed dash size.

Back to top

Data Label Tab

Use this tab to specify the properties of data labels on the donuts.

Format Donut - Data Label

Static Data Label

You can specify the properties of the static data labels on the donuts in this box.

  • Show Static Data Label
    Select to show the static data labels. Designer enables the other static data label properties after you select this option.
  • Position
    Select the position of the static data labels on the donuts.
    • auto fit
      Select to display the static data labels automatically.
    • sticker
      Select to display the static data labels beside the donut sections.
    • slim leg
      Select to display the static data labels beside the donut sections and pointed by thin lines.
    • best fit
      Select to display the static data labels at the best fit position automatically.
    • on slices
      Select to display the static data labels on the donut sections (slices).
  • Data Label Type
    Select in which way to display the values in the static data labels.
    • value
      Select to show the value for each donut section.
    • category name
      Select to show the category name for each donut section.
    • percent
      Select to show the percentage of each donut section to the total.
    • value and percent
      Select to show the value and the percentage for each donut section.
    • category name, value
      Select to show the category name and value for each donut section.
    • category name, percent
      Select to show the category name and percentage for each donut section.
    • category name, value, percent
      Select to show the category name, value, and percentage for each donut section.
  • Auto Scale in Number
    Specify whether to automatically scale the Number values in the static data labels that fall into the two ranges:
    • When 1000 <= value < 10^15, Designer applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
    • When 0 < value < 0.001 or value >= 10^15, Designer uses scientific notation to scale the values.

    By default, Designer selects "auto" for the option, meaning, Designer applies the setting that you specify for the same property on the chart in the Report Inspector for the values. If you select "true", Designer applies the specified format to the integer part of the values after scaling them; however, if the specified format conflicts with the logic of Auto Scale in Number, for example, the values display in percentage, Designer ignores the Auto Scale in Number setting. Select "false" if you do not want to scale the values.

  • Line Color
    Specify the color of the thin lines that point to the static data labels. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
  • Suppress Label When 0
    Select if you do not want to display the static data label whose value is 0 in the chart.
  • Show Truncated Label
    Select to truncate the static data labels that go beyond the boundaries of the chart paper instead of them being hidden altogether.

Font

You can specify the font format of the text in the static data labels in this box.

  • Font list
    This drop-down list contains all the font faces that you can select to apply to the text.
  • Font Size
    Specify the font size of the text.
  • Font Color
    Specify the font color of the text. To edit the color, select the color indicator and select a color from the color palette or type the hexadecimal value of a color (for example, 0xff0000) in the text box.
  • Transparency
    Specify the color transparency of the text.
  • Rotation
    Specify the rotation angle of the text around its center, in degrees. The default value is 0.
  • Shearing
    Specify the gradient of the text.

Effects

You can specify the special effects for the text in the static data labels in this box.

  • Style
    Select the font style of the text. It can be one of the following: plain, bold, italic, and bold italic.
  • Strikethrough
    Select the style of the horizontal line using which to strikethrough the text. It can be one of the following: none, thin line, bold line, and double lines.
  • Underline
    Select the style of the horizontal line under the text. It can be one of the following: none, single, single lower, bold line, bold lower, double lines, bold double, patterned line, and bold patterned. When you select "patterned line" or "bold patterned", Designer draws a line or bold line in the pattern of the text.

    • Note icon Web Report Studio and JDashboard do not support underlining chart text, therefore, Logi Report Engine ignores this property when the chart runs in Web Report Studio or is used in a dashboard.

  • Superscript
    Select to raise the text above the baseline and change the text to a smaller font size, if a smaller size is available.
  • Embossed
    Select to make the text appear to be raised off the page in relief.
  • Outlined
    Select to display the inner and outer borders of each character.
  • Subscript
    Select to lower the text below the baseline and change the text to a smaller font size, if a smaller size is available.
  • Engraved
    Select to make the text appear to be imprinted or pressed into the page.
  • Shadowed
    Select to add a shadow beneath and to the right of the text.

Back to top

Hint Tab

Use this tab to specify the properties for the hint of the donut sections.

Format Donut - Hint

Show Category and Series

Select to include the category and series values in the hint.

Auto Scale in Number

Specify whether to automatically scale the Number values in the hint that fall into the two ranges:

  • When 1000 <= value < 10^15, Designer applies the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
  • When 0 < value < 0.001 or value >= 10^15, Designer uses scientific notation to scale the values.

By default, Designer selects "auto" for the option, meaning, Designer applies the setting that you specify for the same property on the chart in the Report Inspector for the values. If you select "true", Designer applies the specified format to the integer part of the values after scaling them; however, if the specified format conflicts with the logic of Auto Scale in Number, for example, the values display in percentage, Designer ignores the Auto Scale in Number setting. Select "false" if you do not want to scale the values.

Customize Chart Value Names

Select to customize the names of the fields on the value axis which you want to display in the hint. By default, Designer applies the display names of the fields in the hint to label the values which may be not intuitive to users. You can select the option and select the ellipsis Ellipsis button to customize the names in the Customize Chart Value Names dialog box to help users better understand the values.

Back to top

Behaviors Tab

Designer displays the Behaviors tab only when the donut chart is in a library component. You can use it to specify web behaviors to the donuts.

Format Donut - Behaviors

Add button Add button

Select to add a new web behavior line.

Trash Can button Remove button

Select to delete the specified web behavior.

Move Up button Move Up button

Select to move the specified web behavior higher in the list. At runtime, when an event bound with more than one action happens, JDashboard triggers the upper action first.

Move Down button Move Down button

Select to move the specified web behavior lower in the list.

Events

This column shows the events that you select to trigger the web actions.

Actions

This column shows the web actions that you specify for the events to trigger. Select the ellipsis Ellipsis button in each cell to bind the web action using the Web Action List dialog box.

Back to top

BackPrevious Topic  Next TopicNext