BackPrevious Topic  Next TopicNext

Format Bench Dialog Box Properties

This topic describes how you can use the Format Bench dialog box to format the bars of a bench chart. Server displays the dialog box when you right-click a bench chart and select Format Graph from the shortcut menu.

Format Bench dialog box

Style

Select the style of the bars in the chart.

  • Normal
    Select to make the bars be quadrate.
  • Cylinder
    Select to make the bars be columned. It takes effect only when you select Use Depth in the dialog box.
  • Vary Colors
    Select to make each bar of the chart take a different color schema. It takes effect for clustered bar/bench types when the chart has no series field.

Size

Specify the size of the bars in the chart.

  • Width
    Specify the bar height as a percentage of the unit height.

Depth

Specify the depth properties for the bars of the chart.

  • Use Depth
    Select true if you want to make the bars visually three-dimensional.
    • Depth
      Specify the depth of the bars, in inches.
    • Depth Direction
      Specify the angle of the axis along the depth of the bars, in degrees.

Static Data Label

Specify the properties of the static data labels on the bars.

  • Show Static Data Label
    Select true if you want to show the static data labels on the bars. Only when it is true can the following static data label properties work.
  • Style
    Select the display type for data values in the static data labels.
    • Value
      Server displays the value for each bar.
    • Percent
      Server displays the percentage of each bar to the total.
    • Value and Percent
      Server displays the value and the percentage for each bar.
  • Position
  • Select the position of the static data labels on the bars.
    • Autofit
      Select to display the static data labels automatically.
    • Outside Top
      Select to display the static data labels on the outside top of the bars.
    • Inside Top
      Select to display the static data labels on the inside top of the bars.
    • Inside Center
      Select to display the static data labels at the inside center of the bars.
    • Inside Bottom
      Select to display the static data labels at the inside bottom of the bars.
  • Auto Arrange
    For a bench chart, Server always displays the static data labels horizontally at the specified position, regardless of this property value.
  • Auto Scale in Number
    Select true if you want to automatically scale the values that are of the Number data type when the values fall into the two ranges:
    • When 1000 <= value < 10^15, Logi Report uses the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
    • When 0 < value < 0.001 or value >= 10^15, Logi Report uses scientific notation to scale the values.

    The default value auto means that the setting follows that of the chart.

Graph Border

Specify the properties for the border of the bars.

  • Show Border
    Select to show the border and enable the border properties.
    • Line Style
      Select the line style of the border.
    • Color
      Specify the color of the border.
    • Thickness
      Specify the thickness of the border.
    • Transparency
      Specify the transparency for the border color.

Hint

Specify the properties of the data marker hint.

  • Show Category and Series
  • Select to include the category and series values in the data marker hint.
  • Auto Scale in Number
    Select true if you want to automatically scale the values that are of the Number data type when the values fall into the two ranges:
    • When 1000 <= value < 10^15, Logi Report uses the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
    • When 0 < value < 0.001 or value >= 10^15, Logi Report uses scientific notation to scale the values.

    The default value auto means that the setting follows that of the chart.

  • Customize Chart Value Names
    Select if you want to customize the names of the fields used as the values in the chart. Server uses the customized names in the data marker hint. Then select the ellipsis button Choose button to open the Customize Chart Value Names dialog box.

OK

Select to apply any changes you made here and exit the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Help button Help button

Select to view information about the dialog box.

Close button Close button

Select to close the dialog box without saving any changes.

Back to top

BackPrevious Topic  Next TopicNext