BackPrevious Topic  Next TopicNext

Format Bar Gauge Dialog Box Properties

You can use the Format Bar Gauge dialog box to format a bar gauge chart. This topic describes the properties in the dialog box.

This topic contains the following sections:

You see these elements on all the tabs:

OK

Select to apply any changes you made here and exit the dialog box.

Cancel

Select to close the dialog box without saving any changes.

Help

Select to view information about the dialog box.

Staff Graph Tab Properties

Specify the properties for bars in the bar gauge.

Format Bar Gauge dialog box - Staff Graph

Bar

Specify the properties of the bars.

  • Layout
    Select the layout of the bars. It can be vertical or horizontal.
  • Thickness
    Specify the thickness of the bars, in inches.
  • Start Style
    Select the style for the start graph of the bars.
  • End Style
    Select the style for the end graph of the bars.

Border

Specify the properties of the bar border.

  • Line Style
    Select the line style of the border.
  • Thickness
    Specify the thickness of the border, in inches.
  • Color
    Specify the color of the border. To change the color, select the color indicator to access the Select Color dialog box, and then specify a new color. You can also type a hexadecimal RGB value to specify a color, for example, #9933ff.
  • Transparency
    Specify the transparency for the border color.

Show Range Name

Select to show the names of the ranges you define on the Range Color tab. Then, you can continue to specify the font properties of the text in the range names.

  • Font
    Select the font face you want to apply to the text.
  • Size
    Specify the font size of the text.
  • Fill Type
    Select the fill type of the text: none, color, gradient, or texture.
  • Color
    Specify the font color of the text.
  • Font Style
    Select the font style of the text: plain, bold, italic, or bold italic.
  • Transparency
    Specify the color transparency of the text.

Back to top

Axis Tab Properties

The tab consists of four more tabs: Axis, Tick Mark, Label, and Format.

Axis

Specify the properties of the axis in the bar gauge.

Format Bar Gauge dialog box - Axis - Axis tab

Show Axis

Select to show the axis.

Type

Specify the position relationship of the axis and the bar. When you set the Layout property to horizontal on the Staff Graph tab, you see these properties:

  • Top
    Select to display the axis on the top of the bar.
  • Bottom
    Select to display the axis on the bottom of the bar.
  • Center
    Select to display the axis in the center of the bar.

When you set the Layout property to vertical on the Staff Graph tab, you see these properties:

  • Left
    Select to display the axis on the left of the bar.
  • Right
    Select to display the axis on the right of the bar.
  • Center
    Select to display the axis in the center of the bar.

Option

Specify the values you want to display in the chart.

  • Minimum Value
    Specify the minimum value to display in the chart.
  • Maximum Value
    Specify the maximum value to display in the chart.

Line

Specify the properties of the axis line.

  • Color
    Specify the color of the line.
  • Style
    Select the style of the line.
  • Transparency
    Specify the transparency for the color of the line.
  • Thickness
    Specify the thickness of the line.
  • Use Range Color
    Select to use the color you define for the ranges as the line color. In this case, Server disables the Color and Transparency properties.

Gap

  • Staff Axis Gap
    Specify the gap between the axis and the bar when the axis is not in the center of the bar.

Tick Mark

Specify the properties of the tick marks on the axis.

Format Bar Gauge dialog box - Axis - Tick Mark

Type

Specify the position relationship of the axis and the tick marks. When you set the Layout property to horizontal on the Staff Graph tab, you see these properties:

  • None
    Select if you don't want to display the tick marks on the axis. Then, ignore all the other tick mark related properties.
  • Top
    Select to display the tick marks on the top of the axis.
  • Bottom
    Select to display the tick marks on the bottom of the axis.
  • Center
    Select to display the tick marks in the center of the axis.

When you set the Layout property to vertical on the Staff Graph tab, you see these properties:

  • None
    Select if you don't want to display the tick marks on the axis. Then, ignore all the other tick mark related properties.
  • Left
    Select to display the tick marks on the left of the axis.
  • Right
    Select to display the tick marks on the right of the axis.
  • Center
    Select to display the tick marks in the center of the axis.

Major Tick Mark Line

Specify the properties of the major tick mark line.

  • Correlate with Axis
    Select if you want the line properties of the major tick marks to correlate with that of the axis automatically.
    • Color
      Specify the color of the major tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Style
      Select the style of the major tick mark line.
    • Transparency
      Specify the color transparency of the major tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Thickness
      Specify the thickness of the major tick mark line.
  • Increment
    Specify the distance between two adjacent major tick marks on the axis.
  • Number of Tick Marks 
    Specify the number major tick marks you want to display on the axis.
  • Tick Mark Length 
    Specify the length of the major tick mark line, in inches.

Minor Tick Mark Line

Specify the properties of the minor tick mark line.

  • Correlate with Axis
    Select if you want the line properties of the minor tick marks to correlate with that of the axis automatically.
    • Color
      Specify the color of the minor tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Style
      Select the style of the minor tick mark line.
    • Transparency
      Specify the color transparency of the minor tick mark line. Server disables this property when you select Use Range Color on the Axis > Axis tab.
    • Thickness
      Specify the thickness of the minor tick mark line.
  • Increment
    Specify the distance between two adjacent minor tick marks on the axis.
  • Number of Tick Marks 
    Specify the number of minor tick marks you want to display on the axis.
  • Tick Mark Length 
    Specify the length of the minor tick mark line, in inches.

Label

Specify the properties of the major tick mark labels.

Format Bar Gauge dialog box - Axis - Label

Option

Specify the type of the labels.

  • None

    Select if you don't want the labels to show.
  • Normal

    Select if you want to customize the labels.
    • Label Every N Major Tick Marks

      Specify the frequency at which you want to label the major tick marks.
    • Number of Major Labels

      Specify the number of major tick mark labels to display on the axis.
      • Auto

        Select to display all major tick mark labels.
      • Fixed

        Select and specify the number of the major tick mark labels to display on the axis.
  • Range Value
    Select if you want the labels to show the range values you define.

Gap

Specify the gap properties for the data labels.

  • Label Axis Gap 
    Specify the distance between the data labels and the axis, in inches.
  • Best Effect
    Select to adjust the data labels automatically to place them in the best positions. In this case, Server hides some labels when they overlap.

Font

Specify the font format of text in the data labels.

  • Font
    Select the font face of the text.
  • Size
    Specify the font size of the text.
  • Fill Type
    Select the fill type of the text: none, color, texture, or gradient.
  • Color 
    Specify the font color of the text. Server disables this property when you select Use Range Color on the Axis > Axis tab.
  • Font Style
    Select the font style of the text: plain, bold, italic, or bold italic.
  • Transparency
    Specify the color transparency of the text. Server disables this property when you select Use Range Color on the Axis > Axis tab.

Orientation

  • Angle
    Specify the rotation angle of the data labels.

Format

Specify the data format of the major tick mark labels. See Format.

Format Bar Gauge dialog box - Axis - Format

Back to top

Pointer Tab Properties

Specify the properties of the pointers in the bar gauge.

Format Bar Gauge dialog box - Pointer

Use Pointer

Select to use pointers to indicate values in the bar gauge.

  • Pointer Style
    Specify the properties of the pointers.
    • Value Pointer
      Specify the style of the value pointers. Select a style from the list, or select Customized to specify another image as the value pointers in the Insert Image dialog box.
    • Width
      Specify the width of the pointers.
    • Height
      Specify the height of the pointers.
    • Position
      Select the position of the pointers relative to the bar.
    • Gap
      Specify the distance between the pointers and the bar.
    • Style List
      Select to open the Style List dialog box to specify the style for pointers in the same data series, respectively.
  • Pointer Color
    Specify color properties of the pointers.
    • Color
      Specify the color of the pointers.
    • Color List
      Select to open the Color List dialog box to specify the color pattern for pointers in the same data series, respectively.
    • Transparency
      Specify the transparency for the color of the pointers.
    • Use Range Color
      Select to use the color you define for the ranges as the pointer color. Then, Server disables the preceding three properties.
  • Pointer Value
    Specify the properties for the values of the pointers.
    • Show Pointer Value
      Select to show the values for the pointers.
      • Position
        Select the position relationship between the values and the pointers. If you select customized, the X and Y settings on the General tab of the Format Pointer Label dialog box will take effect.

Use Color Bar

Select to use color bars to indicate values in the bar gauge.

  • Pointer Color
    Specify the properties of the color bars.
    • Color
      Specify the color of the bars.
    • Transparency
      Specify the transparency for the color of the bars.
    • Thickness
      Specify the thickness of the color bars.
    • Color List
      Select to open the Color List dialog box to specify the color pattern for color bars in the same data series, respectively.
  • Pointer Value
    Specify the properties for the values of the color bars.
    • Show Pointer Value
      Select to show values for the color bars.
    • Position
      Select the position relationship between the values and the color bars. If you select customized, the X and Y settings on the General tab of the Format Pointer Label dialog box will take effect.

Pointer Border

Specify the properties of the pointer border.

  • Show Pointer Border
    Select to show the border of the pointers and enable the border properties.
    • Line Style
      Select the line style of the border.
    • Color
      Specify the color of the border.
    • Thickness
      Specify the weight of the border, in inches.
    • Transparency
      Specify the transparency for the border color.

Back to top

Target Tab Properties

Specify the properties of the target in the bar gauge.

Format Bar Gauge dialog box - Target

Use Target Value

Select to use the target value for the bar gauge.

  • Target Value
    Specify the target value.

Pointer Style

Specify the pointer style for the target value.

  • Target Pointer
    Specify the style of the target pointer. Select a style from the list, or select Customized to specify another image as the target pointer in the Insert Image dialog box.
  • Width
    Specify the width of the target pointer.
  • Height
    Specify the height of the target pointer.
  • Position
    Specify the position of the target pointer relative to the bar.
  • Gap
    Specify the distance between the target pointer and the bar.

Pointer Color

Specify the color properties of the target pointer.

  • Color
    Specify the color of the target pointer.
  • Transparency
    Specify the transparency for the color of the target pointer.

Target Value

Specify the properties of the target value.

  • Show Target Value
    Select to display the target value on the bar gauge.
    • Position
      Select the position of the target value relative to the bar. If you select customized, the X and Y settings on the General tab of the Format Target Label dialog box will take effect.

Back to top

Frame Tab Properties

Specify the properties for the frame of the bar gauge chart.

Format Bar Gauge dialog box - Frame

Size

Specify the size properties of the frame.

  • Frame Size
    Specify the size of the frame.

Fill

Specify the color and transparency of the frame.

  • Fill
    Specify the color to fill the frame.
  • Transparency
    Specify the transparency of the color to fill the frame.

Border

Specify the properties for the border of the frame.

  • Line Style
    Select the line style of the border.
  • Border Type
    Select the type of the border.
  • Color
    Specify the color of the border. To change the color, select the color indicator to access the Select Color dialog box, and then specify a new color. You can also type a hexadecimal RGB value to specify a color, for example, #9933ff.
  • Transparency
    Specify the transparency for the color of the border.
  • Thickness
    Specify the thickness of the border, in inches.

Gauge Group Name

Specify the properties for the gauge group name.

  • Show Gauge Group Name
    Select to display names for the bars in the bar gauge which are the values of the field on its category axis. If the bar gauge contains no category field, the group name shows Report by default.
    • Position
      Select the position of the names relative to the bars. If you select customized, the X and Y settings on the General tab of the Format Gauge Label dialog box will take effect.

Back to top

Range Color Tab Properties

Specify different colors to fill the bars in the bar gauge in different ranges.

Format Bar Gauge dialog box - Range Color

Use Gradient Effect

Select to use gradient effect for the color.

Add buttonAdd button

Select to add a new color range.

Remove buttonRemove button

Select to remove the selected color range.

Range table

  • Minimum
    Specify the minimum value of a range.

  • Maximum
    Specify the maximum value of a range.

  • Color
    Select the color cell to open the Select Color dialog box, and specify a new color.

  • Name
    Specify the name of a range.

Others

Specify the properties for values that do not fall into any of the ranges you define in the range table.

  • Name
    Specify the name for the values.
  • Color
    Specify the color for the values. To change the color, select the color indicator to access the Select Color dialog box, and then specify a new color. You can also type a hexadecimal RGB value to specify a color, for example, #9933ff.

Back to top

Hint Tab Properties

Specify the properties of the data marker hint.

Format Bar Gauge dialog box - Hint

Show Category and Series

Select to include the category and series values in the data marker hint.

Auto Scale in Number

Select true if you want to automatically scale the values that are of the Number data type when the values fall into the two ranges:
  • When 1000 <= value < 10^15, Logi Report uses the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
  • When 0 < value < 0.001 or value >= 10^15, Logi Report uses scientific notation to scale the values.

The default value auto means that the setting follows that of the chart platform.

Back to top

BackPrevious Topic  Next TopicNext