Crosstab Properties

Property Name	Description
General
Display Name	Specifies the display name of the object. Data type: String
Instance Name	Shows the instance name of the object. This property is read only.
Geometry
Height	Specifies the height of the object, in inches. Type a numeric value to change the height. Data type: Float
Width	Specifies the width of the object, in inches. Type a numeric value to change the width. Data type: Float
X	Specifies the horizontal coordinate of the upper-left corner of the object, relative to its parent container. This property is unavailable if the Position property is set to static. Type a numeric value to change the position in inches. Data type: Float
Y	Specifies the vertical coordinate of the upper-left corner of the object, relative to its parent container. This property is unavailable if the Position property is set to static. Type a numeric value to change the position in inches. Data type: Float
Color
Background	Specifies the background color of the object. Choose a color from the drop-down list or select Custom to define a color in the Color Picker dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color. Data type: String
Alternating Line Color
Direction	Specifies whether the color defined by the property Pattern List will apply to the fields in the same rows or columns in the crosstab. vertical - The value of the property Pattern List will take effect on the fields in the same columns, except for the total columns. horizontal - The value of the property Pattern List will take effect on the fields in the same rows, except for the total rows. Data type: Enumeration
Show	Specifies whether to enable setting alternating line color for the crosstab. Only when it is set to true, the setting for the property Direction can take effect. Data type: Boolean The setting of the alternating line color function for crosstab can only take effect when all the aggregate fields in the crosstab have transparent background.
Others
Auto Scale in Number	Select true if you want to automatically scale the values that are of the Number data type when the values fall into the two ranges: When 1000 <= value < 10^15, Logi Report uses the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12). When 0 < value < 0.001 or value >= 10^15, Logi Report uses scientific notation to scale the values. Data type: Boolean
Enable Navigation	Specifies whether to enable scrollbars on the crosstab when the parent container cannot fully display the data of the crosstab. When this property is set to true, you can further specify the height and width of the frame for holding the crosstab, by setting the two properties Navigation Height and Navigation Width. Data type: Boolean
Export to CSV	Specifies whether to include the object when exporting the report to CSV. Data type: Boolean
Export to Excel	Specifies whether to include the object when exporting the report to Excel. Data type: Boolean
Export to HTML	Specifies whether to include the object when exporting the report to HTML. Data type: Boolean
Export to PDF	Specifies whether to include the object when exporting the report to PDF. Data type: Boolean
Export to PostScript	Specifies whether to include the object when exporting the report to PostScript. Data type: Boolean
Export to Report Result	Specifies whether to include the object in Web Report Studio or when the report is opened in Web Report Result. Data type: Boolean
Export to RTF	Specifies whether to include the object when exporting the report to RTF. Data type: Boolean
Export to Text	Specifies whether to include the object when exporting the report to Text. Data type: Boolean
Export to XML	Specifies whether to include the object when exporting the report to XML. Data type: Boolean
Invisible	Specifies whether to show or hide the object. All formulas and calculations will still be performed if the property is set to true. You can also use a formula to control whether to show the object. Data type: Boolean
Navigation Height	Specifies the height of the frame for holding the crosstab. Type a numeric value to specify the height. If no value is given here, Logi Report will calculate the height. This property takes effect only when Enable Navigation is set to true. Data type: Float
Navigation Width	Specifies the width of the frame for holding the crosstab. Type a numeric value to specify the width. If no value is given here, Logi Report will calculate the width. This property takes effect only when Enable Navigation is set to true. Data type: Float
Position	Specifies the position of the object. Available when the object is directly contained in the report body or a tabular cell. absolute - The object's position will be decided by its X and Y property values. static - The object will be positioned at the default location in its container. If selected, the X, Y and other position-related properties will be hidden or disabled. Data type: Enumeration
Crosstab Property
Column Totals on Left	Specifies whether to display the total columns on the left of the aggregates. Data type: Boolean
Row Totals on Top	Specifies whether to display the total rows on the top of the aggregates. Data type: Boolean
Suppress Column Header	Specifies whether to suppress the column header of the crosstab. Data type: Boolean
Suppress Row Header	Specifies whether to suppress the row header of the crosstab. Data type: Boolean

Property Name

Description

General

Display Name

Specifies the display name of the object.

Data type: String

Instance Name

Shows the instance name of the object. This property is read only.

Geometry

Height

Specifies the height of the object, in inches. Type a numeric value to change the height.

Data type: Float

Width

Specifies the width of the object, in inches. Type a numeric value to change the width.

Data type: Float

X

Specifies the horizontal coordinate of the upper-left corner of the object, relative to its parent container. This property is unavailable if the Position property is set to static. Type a numeric value to change the position in inches.

Data type: Float

Y

Specifies the vertical coordinate of the upper-left corner of the object, relative to its parent container. This property is unavailable if the Position property is set to static. Type a numeric value to change the position in inches.

Data type: Float

Color

Background

Specifies the background color of the object. Choose a color from the drop-down list or select Custom to define a color in the Color Picker dialog box. You can also type a hexadecimal RGB value (for example, 0xff0000) to specify a color.

Data type: String

Alternating Line Color

Direction

Specifies whether the color defined by the property Pattern List will apply to the fields in the same rows or columns in the crosstab.

vertical - The value of the property Pattern List will take effect on the fields in the same columns, except for the total columns.
horizontal - The value of the property Pattern List will take effect on the fields in the same rows, except for the total rows.

Data type: Enumeration

Show

Specifies whether to enable setting alternating line color for the crosstab. Only when it is set to true, the setting for the property Direction can take effect.

Data type: Boolean

Note icon The setting of the alternating line color function for crosstab can only take effect when all the aggregate fields in the crosstab have transparent background.

Others

Auto Scale in Number

Select true if you want to automatically scale the values that are of the Number data type when the values fall into the two ranges:

When 1000 <= value < 10^15, Logi Report uses the following quantity unit symbols of the International System of Units to scale the values: K (10^3), M (10^6), G (10^9), and T (10^12).
When 0 < value < 0.001 or value >= 10^15, Logi Report uses scientific notation to scale the values.

Data type: Boolean

Enable Navigation

Specifies whether to enable scrollbars on the crosstab when the parent container cannot fully display the data of the crosstab.

When this property is set to true, you can further specify the height and width of the frame for holding the crosstab, by setting the two properties Navigation Height and Navigation Width.

Data type: Boolean

Export to CSV

Specifies whether to include the object when exporting the report to CSV.

Data type: Boolean

Export to Excel

Specifies whether to include the object when exporting the report to Excel.

Data type: Boolean

Export to HTML

Specifies whether to include the object when exporting the report to HTML.

Data type: Boolean

Export to PDF

Specifies whether to include the object when exporting the report to PDF.

Data type: Boolean

Export to PostScript

Specifies whether to include the object when exporting the report to PostScript.

Data type: Boolean

Export to Report Result

Specifies whether to include the object in Web Report Studio or when the report is opened in Web Report Result.

Data type: Boolean

Export to RTF

Specifies whether to include the object when exporting the report to RTF.

Data type: Boolean

Export to Text

Specifies whether to include the object when exporting the report to Text.

Data type: Boolean

Export to XML

Specifies whether to include the object when exporting the report to XML.

Data type: Boolean

Invisible

Specifies whether to show or hide the object. All formulas and calculations will still be performed if the property is set to true. You can also use a formula to control whether to show the object.

Data type: Boolean

Navigation Height

Specifies the height of the frame for holding the crosstab. Type a numeric value to specify the height. If no value is given here, Logi Report will calculate the height. This property takes effect only when Enable Navigation is set to true.

Data type: Float

Navigation Width

Specifies the width of the frame for holding the crosstab. Type a numeric value to specify the width. If no value is given here, Logi Report will calculate the width. This property takes effect only when Enable Navigation is set to true.

Data type: Float

Position

Specifies the position of the object. Available when the object is directly contained in the report body or a tabular cell.

absolute - The object's position will be decided by its X and Y property values.
static - The object will be positioned at the default location in its container. If selected, the X, Y and other position-related properties will be hidden or disabled.

Data type: Enumeration

Crosstab Property

Column Totals on Left

Specifies whether to display the total columns on the left of the aggregates.

Data type: Boolean

Row Totals on Top

Specifies whether to display the total rows on the top of the aggregates.

Data type: Boolean

Suppress Column Header

Specifies whether to suppress the column header of the crosstab.

Data type: Boolean

Suppress Row Header

Specifies whether to suppress the row header of the crosstab.

Data type: Boolean